Video "most reliable gun I've ever had" - Simon tries the new angled HiKOKI brad nailer ‼️LAUNCHING 6TH JULY 2026‼️ Simon spent a couple of weeks putting the new Hikoki 15g angled nailer through its paces, and he's sharing his honest verdict. This is the first angled Hikoki pin gun that's a real option for anyone who's wanted to switch to Hikoki but needed the angled version. In this video, Simon covers: ✅ Pin holes left by the gun ✅ How the 100-pin nail strips held up ✅ How it holds up on the job after two weeks of real use If you've been waiting for an angled Hikoki to land, this is the one to watch. 👍 Like the video and 🔔 subscribe for more first looks and real tool reviews. Have a look around the channel while you're here for plenty more.
Video "definitely recommend" Sean at ALN Carpentry on Multifix Sean from ALN Carpentry gives his experience of using Multifix, what makes him stay, and why he uses Multifix as his primary supplier! Like and subscribe to see more!
Video Multifix 312, 322 and 304: What is the difference? In this video, Daniel explains the differences between the mitre kits that Multifix stock and which option is best for you. You can buy the products mentioned in this video here: Anti-yellowing Multifix 304: https://multifixuk.com/products/100g-400ml-multifix-304-mitre-adhesive-kit Premium Multifix 322: https://multifixuk.com/products/50g-200ml-mitre-adhesive-kit Trade Multifix 312: https://multifixuk.com/products/50g-200ml-multifix-312-mitre-adhesive-kit
Video How to re-air a HiKOKI 2nd Gen Nailer with an Inflator Learn how to repressurise your HiKOKI 2nd Generation Nailer with Daniel, demonstrated on a 1st fix gun (NR1890DCAJPZ). This is the same process for the whole 2nd generation nail gun range: 2nd fix straight brad nailer (NT1865DSAJXZ), 2nd fix angled brad nailer (NT1865DSAJXZ) and the Metal Connector (NR1838DKAJXZ). This process has been previously demonstrated with Nick from HiKOKI with a compressor and regulator. But with the regulator being more expensive and hard to buy, we recommend a more accessible kit consisting of an inflator and adapter, which you can buy as a kit exclusively at Multifix. See this article for the full kit list and where you can get it: https://multifixuk.com/expert_hub/how-to-re-gas-hikoki-2nd-gen-1st-fix-framing-nailer You will learn: 1. How to enter maintenance mode 2. How to remove the rear cap and access the gas valve 3. Correct re-gassing procedure and pressures, depending on the tool. 4. Tips to prevent gas leaks and extend tool life A nailer with daily use would need re-aired every 3-6 months. 📞 Any further questions? Contact us on 02032484086 or [email protected] #HiKOKI #NailGun #ToolMaintenance #FirstFix #carpentryskills #PowerTools
Video How to troubleshoot your HiKOKI 2nd Gen Nailers In this video, we will go through the common issues we get asked about the HiKOKI 2nd-generation nailers. It has been chaptered so that you can skip to whatever part is relevant. This is applicable to the 1st fix nailer (NR1890DCAJPZ), 2nd fix straight brad nailer (NT1865DSAJXZ) and the latest Metal Connector (NR1838DKAJXZ) To see what bolts to remove when checking the 1st fix and MCN for nail jams, see diagram here: https://canva.link/efojifhgy1gg3y3 Any questions, please get in contact and we can help you out: [email protected] or 0203 248 4086 0:00 - Introduction 0:21 - Why a new battery can solve a red flashing light 0:38 - Still showing issue light, try this 1:02 - How to clean & clear 1st fix jam 1:12 - How to clean & clear 2nd fix jam 1:43 - What to clean nailers with 2:03 - How to clean & clear MCN 3:35 - New battery, clean & cleared mag, try reset 3:57 - How to reset 1st fix nailer 4:20 - Tip for resetting 1st fix nailer 4:45 - How to reset MCN & 2nd fix nailers 5:01 - Top tip for resetting all guns 5:13 - Nails are not sinking in, try this 5:53 - How to re-gas your gun videos
Video "I would definitely recommend" Andy at Canfield's very honest review of Multifix. Andy gives his experiences with what he gets from Multifix and whether he recommends the service and products he gets to others in the Carpentry industry. Sign up now: https://multifixuk.com/users/sign_up?return_to=true *DISCLAIMER: The views expressed in all testimonials and reviews are solely those of the contributor. They are unscripted personal opinions based on an individual experience*
Video On Time. On Your Site. We deliver, set up and support you on site. Switching has never been easier. Book your demo now by calling 0203 248 4086
Video Feel the Power. Make the Switch. Test it before you switch. We bring the kit, set it up and let you feel the fix. No gas, no downtime...just drive, Unbeatable Drive. Book your demo by calling 02032484086
Video The Big Switch starts now We're moving from gas to electric-faster, cleaner, no faff. HiKOKI nailers + Multifix nails + Unbeatable service = Unbeatable Drive. Ready to try it on your site?
Video How to install your HookLock At Multifix we developed a solution to stop the belt/rafter hook supplied with the 2nd generation 1st fix guns from swinging. This will work with any of the other HiKOKI nailers that are supplied with the same swinging hook. Any questions, please get in touch! 0203 248 4086 or DM us on Instagram.
Video "Heard good things" | George at Sudman Carpentry Most trades have been there — chasing deliveries, double-checking orders, wondering if the fixings will turn up on time. This video follows a carpentry contractor who’s been using Multifix for a couple of years and why it’s just worked. Straightforward ordering, consistent deliveries, and people on the phone who actually know your name. No big promises, just a supplier doing the basics properly day in, day out. Watch the review to hear it from someone on site, not a sales desk. 👉 Sign up and get started at https://multifixuk.com/users/sign_up *DISCLAIMER: The views expressed in all testimonials and reviews are solely those of the contributor. They are unscripted personal opinions based on an individual experience*
Video "Doesn't feel so bulky" - 1st look at the UK's first Hikoki Twist Nailer As director of Canfield Carpentry, Andy reviews what his initial thoughts are of the HiKOKI Metal Connector Nailer, or MCN, and all the different features that it comes with. If you're like Andy and want to buy bulk for your company, drop us a call and we can discuss the best option for you! 0203 248 4086 *DISCLAIMER: The views expressed in all testimonials and reviews are solely those of the contributor. They are unscripted personal opinions based on an individual experience*
Video "So smooth" - trying the UK's first Hikoki Twist Nailer Mark from Canfield Carpentry sees the Hikoki Metal Connector (MCN) for the first time, tried it out and gives us his thoughts how it performed. Subscribe for more like this! Available here: https://multifixuk.com/products/hikoki-18v-metal-connector-nailer-c-w-2-x-5ah-multivolt-batt-fast-charger *DISCLAIMER: The views expressed in all testimonials and reviews are solely those of the contributor. They are unscripted personal opinions based on an individual experience*
Video Industry changing HiKOKI Metal Connector Now avalible to buy here: https://multifixuk.com/products/hikoki-18v-metal-connector-nailer-c-w-2-x-5ah-multivolt-batt-fast-charger
Video Easiest way to activate Multifix gas cells Looking for the easiest way to activate a Multifix gas cell? In this video, we walk you through a quick, safe, and reliable method to activate Multifix gas cells that works for both first fix and second fix gas cells. By following this method, you’ll hear a clear click that confirms the gas cell is activated and ready to use. This should ensure that the gas cell doesnt get damaged and create leaks or issues when being used. 👍 If you found this helpful, share the video and subscribe for more practical tips, tool advice, and step-by-step guides. Thanks for watching!
Video Thank you and we'll see you in 2026! Welcome to Multifix's "2025 in 2 Minutes"! In this fast-paced video, we’ll take you on a whirlwind tour of the key developments and initiatives that Multifix has planned for 2025. Make sure to subscribe for more exciting content!
Video Multifix brads vs Paslode brads? Adam compares Adam goes over exactly what he thinks of the Multifix 2nd fix brad nails, whether he's had any issues with them or recommend to others in the carpentry field. To sign up, see here: https://multifixuk.com/users/sign_up?return_to=true Subscribe to ensure that you don't miss out on any future comparisons, products and events! *DISCLAIMER: The views expressed in all testimonials and reviews are solely those of the contributor. They are unscripted personal opinions based on an individual experience*
Video Is it worth trying? Multifix review from Adam at PGM Carpentry Adam goes over exactly what he thinks of Multifix, whether he's had any issues or recommend to others in the carpentry field. To sign up, see here: https://multifixuk.com/users/sign_up?return_to=true Subscribe to ensure that you don't miss out on any future comparisons, products and events! *DISCLAIMER: The views expressed in all testimonials and reviews are solely those of the contributor. They are unscripted personal opinions based on an individual experience*
Video HiKOKI 2nd Gen 2nd fix brad gun review | Adam at PGM Carpentry Join us for this review of the Hikoki 2nd Generation 2nd Fix Gun (NT1865DSAJXZ), featuring Adam from PGM Carpentry! In this video, we dive into Adam's favourite feature, discuss any downsides he found, and whether he would recommend it to fellow career carpenters. Whether you're a seasoned pro or just starting out, this review will provide valuable insights so don't miss out on Adam's opinions and tips! Buy yours here: https://multifixuk.com/products/hikoki-18v-16g-2nd-gen-straight-nailer-2-x-2ah-batts-charger-nt1865dsajxz *DISCLAIMER: The views expressed in all testimonials and reviews are solely those of the contributor. They are unscripted personal opinions based on an individual experience*
Article A set up guide to re-airing your HiKOKI 2nd gen nailer This is a quick simple guide on how to re-air your HiKOKI 2nd gen nail gun. We will run through what equipment you need and where you can buy it, the step by step process, following alongside the video we created with a HiKOKI service engineer and any frequently asked questions at the bottom. Equipment You will need: A compressor – we recommend the HiKOKI cordless inflator (you will need an account to see this product). The kit sold at Multifix comes with the re-gassing adaptor – options elsewhere won’t include the adaptor. If you already have a cordless inflator, you can buy the re-gasing tool online at Multifix. A 6mm hex key Pliers (small long nosed or circlip work best) 2 batteries; 1 for the nail gun and 1 for the cordless compressor Put the nail gun into maintenance mode by turning the gun on and hold the on/off button and the nail count button for 3 seconds. The blue light will flash, and the green light should remain lit. To extract the striker blade, hold down the magazine feeder, push the nose on the edge of a workbench, fire the gun a few times until you can see the blade in the nose. Ensure the tool is pointed away from your body when putting the driver blade out. See video clip here to see this being done. Remove the battery. Using your pliers, remove the black cap and unscrew the valve bolt using the hex key supplied with the gun. Screw the re-gassing adaptor into the gun and then attach the inflator hose onto the adaptor. Set the machine to the right pressure for your tool (see the list below) and press start. The inflator will stop once 9.1 bar of pressure has been reached; when it stops inflating, disconnect the inflator and unscrew the re-gassing adaptor from the gun. Screw on the valve bolt and cap back into place. Replace the battery, turn the nail gun on and repeat step 2 to retract the striker blade. The nailer will switch out of maintenance mode and is now ready to use. If you have any issues, feel free to contact us on phone or email for help. FAQs What is re-gassing? Otherwise called re-airing, or re-pressurising, the process is to fill up the pressure canister in the back of the gun that enables the gun to fire the nail. How often do you need to re-gas? In short, it's every 100,000 nails shot. So for a 1st fixer, you’d sink on average 3,500 nails per day and would expect to re-gas your nail gun every 3 months. Learn how to see your nail count in this tutorial here. Is the bar pressure the same for all the 2nd generation nail guns? For all 2nd generation guns, the pressure is different for each one, as listed below. Recommended refill pressures Nailer Refill pressure (bar) 1st fix nail gun (NR1890DCA) 9.1 2nd fix straight 16G brad gun (NT1865DSA) 7.4 2nd fix angled 15G brad gun (NT1865DAA) 8.7 Metal Connector Nailer(NR1838DKA) 8.3 Can I use a regular compressor to re-gas my HiKOKI nail gun? Yes you can, as long as it has a capacity of >9.1 bar but we recommend the cordless tyre inflator as it is better value for money. For a regular compressor, you need a specific adaptor for each nail gun that has a regulator that ensures the gun is re-gassed to the correct bar pressure. Get in touch with us if you would like to purchase one as they are not avaliable through the portal yet. Can you put too much air in the gun? The optimum pressure is as listed above and using the adaptors suggested above will ensure this. Putting more air in the gun won't make the gun perform any better, and could cause the red light to flash. If this happens, the nail gun may need to be sent to HiKOKI for servicing. Is the re-gassing adaptor the same for other HiKOKI nail guns? For the 2nd generation guns, the adaptor with the cordless compressor is the same for both the 1st fix and 2nd fix, straight and angled. If you're using a regular compressor, then there is a different adaptor for each gun. For 1st generation or other HiKOKI tools, please contact us and we can advise you. Where can I buy the re-gassing adaptor? The re-gassing adaptor will come with the cordless inflator when purchased through Multifix, as this kit is exclusive to us; options elsewhere won’t include the adaptor. If you already have a cordless inflator, you can buy the re-gasing tool online at Multifix. Otherwise, if you have a compressor, you'll need a different tool that has a regulator and this is not on the website at the moment, so please call 0203 248 4086 and we can advise further. Do I need to turn the gun back into maintenance mode to retract the firing pin? No, the firing pin will retract without having to go into maintenance mode, as detailed in step 7. If you need further help please contact us by phone or email.