Video
Top 5 questions we get asked by carpentry contractors evaluating a new supplier
This video is to help you decide whether what we offer is what you need.
Expert Hub
All your questions answered
Article
PVA glue – what are the best applications for the different types?
With there being three key types of glue to use, at Multifix, we have decided to highlight the good and not-so-good bits about all of them. You can see our first glue review here, which is about PU glue. For our second instalment, we’re going to look at the pros and cons of PVA glue. In this article, we will look at the different types of PVA glue, what they all do and where they are best used. What exactly is PVA glue? Polyvinyl acetate, otherwise known as PVA glue, is used for timber bonding, non-structural applications and for general assembly work. This includes things like furniture and laminating timber, while it’s also important to note that it is used with fixings in load critical applications. There are three types of PVA glue and all of them offer something different. The first is D2, which is general purpose and isn’t designed to be a wood adhesive. Instead, it’s mainly used as a primer or a sealer. You can use D2 to coat new plaster before painting over the top, for example. Then there is D3, which is your standard waterproof-once-dried PVA glue, which is the most common PVA glue and the one that is most widely used. Finally, the D4 is PVA with a resin within the formula, making it something of a hybrid glue of sorts. It is stronger and sets faster than D2 and D3. What are the benefits of using PVA glue? Whereas PU glue is very messy, PVA glue isn’t. It’s very easy to tidy up and can be cleaned away with water if it spills over anywhere. In addition, if it bleeds through, it dries clear. Also unlike PU glue, it doesn’t foam up, so it doesn’t need any clamping equipment to hold the workpiece whilst the glue cures, which further adds to the ease of use. In all cases, the bond will be enhanced if clamping is used, but clamping isn’t imperative to the operation. You also don’t need any applicator guns or other equipment for it, you can just use it straight from the bottle. If you so desire, you can make it set faster by using controlled radio waves. The radio waves activates the polymers inside the glue and makes it set a lot quicker, which is ideal in production environments where high throughput is required. What about the negatives? The setting times for PVA glue can vary depending on a range of factors, but they can be quite slow, which can be a bit of an issue. These factors include the temperature of the material and surrounding environment, porosity of the materials being bonded together and the ability for water vapour to escape from the bonded area, amongst others. It will take at least 10-15 minutes to set, sometimes up to an hour, while it can take 24 hours to fully cure. In addition, PVA glue has no gap-filling properties and as such, requires clean and smooth surfaces to work properly. For example, if the timber or materials to be bonded together have a rough surface – ie, sawn timber – the PVA will only bond areas that are physically in contact with one another. This means that in the areas with either no or poor contact, the PVA will dry, but it will have no effect at all on the bond strength. It’s also very inconvenient to use on cold or wet products and this can slow the setting time even further, while when it comes to bonding, it’s only really for use with timber-to-timber applications. PVA is primarily a timber-to-timber adhesive. If multiple substrates, such as concrete, brick or plaster are being bonded together, then a PU or hybrid grab/panel would be a better option, especially as some hybrid adhesives can bond to metal and glass. A dream for wood While PVA glue does have its limitations and can’t be used for a wide range of other materials, when it is used for timber-to-timber, it can really excel. The fact it’s so easy to use also makes it highly convenient, so when the shoe fits for it, it will be a reliable glue for you. To find out what glues we have at Multifix or speak to an advisor for what may be best for your project, you can get in contact with us here.
Article
Benefits of using Brick Jackets in the cold
The British weather can, at times, cycle through all four seasons in a single day. We do our best to power through and to try and get the job finished in rainy circumstances, but sometimes, we need some assistance. That’s where brick jackets come in. They aren’t the most glamorous of products and are very simple in what they do, but they are extremely effective. But what are brick jackets and more importantly, how can they help you? In this article, we will explore what they are and highlight their benefits. First thing’s first – what are Brick Jackets? Much like the name suggests, Brick Jackets are exactly that – jackets for your bricks. They are made from a water resistant ultra-durable woven polypropylene material and as they are 500mm x 500mm x 760mm, they meet the size specs for standard and imperial brick sizes and will cover about half a standard pallet. They are reusable and have a life span of between four and five years, while they are also lightweight and easy to carry by those on site. In addition, you can get your company branding on them, if you so desire. Why are they important? Brick Jackets are important as when the rain, hail or snow starts to fall, your bricks need to be covered. If they get wet, they can start to have efflorescence and that could lead to financial issues, as you’ll likely have to buy more. Efflorescence is a deposit of salt from bricks that come into contact with water and can be especially problematic if this happens within the first 72 hours, as it can degrade the quality of the brick. As such, having a brick jacket around is important and could save you money. All they are designed for is to cover your bricks to keep them dry when you’re working. Sometimes, the best solutions are the ones that are the simplest. And with Brick Jackets, there is a simple solution that can really assist you. An easy win Working in England can be unpredictable for site workers, given the nature of the weather involved. As such, having Brick Jackets available is a quick and easy win for those seeking to not only maintain the bricks, but to also prevent wastage. At Multifix, we do provide Brick Jackets and you can purchase them brick jackets here.
Video
Innovation Event 2024
A short insight into what happened at the first Multifix Innovation Event this year - with more to come.
Article
What is your turnaround for out of stock Ancon products?
With brickwork, Ancon products are highly valued and of great importance to a number of projects up and down the country, which is one of the reasons why we provide their products. For further information of what we can offer from Ancon, click here. However, given their products are so popular, occasionally we run out of stock. As such, in this article, we will explain how long these delays are and how the quantity of your order for out-of-stock products has an impact. What is the general turnaround? The short answer is that it depends on the quantity that you are ordering. If you only need a few boxes of something, then the turnaround is two or three working days. However, if you are ordering a pallet full of Ancon products for example, then the turnaround time is around five working days. We understand that a week can be a long time to be kept waiting and when the lead time exceeds a week, the knock-on effect of that can be costly. As such, Ancon has done all it can to make sure it’s a week at most. Why does the quantity make a difference? To answer this quickly, the higher the volume, the longer it will take as there’s more to get in. Taking the example of the boxes and the pallet, a few boxes won’t take Ancon long to get together and send to us. However, in the event you need a pallet load full of Ancon products, it will take them longer to source it all and to get it over to us. However, as explained above, we do all we can to ensure that the longest you’ll be waiting for your Ancon product will be around five working days. Giving you what you need as quickly as we can At Multifix, we always try to have a healthy supply of stock in place at any point, so you can rest assured that we always try to stay ahead of demand. But in the event that we fall short, we hope that this article has explained sufficiently the lead times and the reasoning behind them. For information of our Ancon availability or to place an order with us, we will always welcome your contact. To find out how to get in touch with us, click here.
Article
What does Multifix actually sell?
While we are very much a construction supplier, one question we are asked is what do we actually sell at Multifix? This is a question that is entirely fair, as many different construction suppliers will supply different parts to different sectors. In this article then, we will explain exactly what we do sell and look at the sectors within the construction industry that we provide for. Carpentry fixings When it comes to carpentry, we will have everything that you need. Be it Paslode guns, fuel cells, fire foam, screws or nails, we have you covered. In fact, when it comes to nails, you will have a fair share of choice. If it’s Paslode you need, we can provide that, but we also stock Fischer nails too. We also provide some specialist items too, such as powered respiratory masks. We have been specialising in carpentry for 30 years and counting and taken a lot of feedback along the way, so our range is very much catered to your needs. Brickwork sundries Our brickwork range is constantly growing, but we have a very good range of sundries available for your projects. By stocking brands such as Ancon, ARC, Timloc, Visqueen and others, we have an expert range for you and can assist on a wide range of projects, including low rise. Whether it’s cavity stop socks, wall ties, DPC or weep vents, we have you covered and we even have some specialist items too, such as flexicorners. Firestopping equipment As a result of partnering with Protecta, we have a wide range of firestopping products that make a huge difference when it comes to guaranteeing safety. These include FR Acrylic and FR Graphite, while we also have a number of FR accessories available for purchase, too. Given the Protecta range is always expanding, including the development of the 80mm batt, the firestopping goods we stock are all innovative and forward-thinking, while meeting all necessary regulations and requirements. Other essentials In addition to all of this, we also offer a good range of other key essentials. This includes unbranded PPE, packers, shims, hand tools such as screwdrivers and chisels, decorating tools, paints, fillers and abrasives. We also sell blades, including jigsaw, reciprocating, planer and diamond, as well as a range of drill bits, drywall products and sealants. Finally, we also sell other miscellaneous items such as ladders, cones, while we have a very small selection of power tools available for purchase. A healthy range At Multifix, we strive to have the best range of products available and that is why we value customer feedback so much, as it enables us to stock the things you actually need, rather than the things we think you’ll need. We are always looking to grow our range and take on recommendations, but as for what we actually sell, we hope this article covers it pretty well. For further information as to what Multifix stocks or is able to stock, or to place an order, please feel free to contact us. You can do so by clicking here.
Article
What is BREEAM certification and why is it important?
As construction seeks to be more sustainable in light of the net zero targets, you may have seen that certain projects are being given BREEAM certification. Whenever we see something has certification, we assume it is good, but what exactly does BREEAM certification mean and why is it important? In this article, we will explore what it stands for and why it is being seen as integral to the overall construction net zero goal. Firstly, what is BREEAM and what does it stand for? BREEAM stands for Building Research Establishment Environmental Assessment Method, which given its length, makes sense to have an acronym! Essentially, it assesses how environmentally sound buildings are and how sustainable the practices have been for their development. This doesn’t only include the building process, but also things like waste management and pollution prevention. Is it easy to gain BREEAM certification? Gaining BREEAM certification is a five-step process that is easy enough to put the wheels in motion for and can all be done online. 1. First, you have to find a licenced BREEAM assessor 2. Once that is secured, you can then register your project for BREEAM assessment. 3. The next step is the assessment itself 4. Then a quality assurance check of the assessment itself is carried out. 5. If the assessment and the quality assurance check is all in good order, then you will receive your BREEAM certification! What does having BREEAM certification actually mean? It entirely depends on your score. BREEAM certification is graded into six categories, which operate as star ratings. If the project scores under 30%, it will be given a zero-star rating and branded unclassified. If it is between 30 and 44%, it’ll be given a one-star ‘pass’ rating, if it’s between 45 and 54%, it’s a two-star ‘good’ rating. The top three are the ones you’d want, with 55% to 69% being a three-star ‘very good’ rating, while 70% to 84% is a four-star ‘excellent’ rating. Top of the tree is an 85% or higher percentage, which gives you a five-star ‘outstanding’ rating. Naturally, if you have a four or five-star certificate, that would mean that the project was an incredibly sustainable process and that would be great for hitting net zero targets, in addition to aiding the environment. It would also reflect well on you, as it would show you are using forward-thinking measures on a development that can increase its asset value thanks to its better-performing assets. A more sustainable future The net-zero target for 2050 is something that the entire construction industry is striving to achieve and with strong BREEAM certification, that goal will be easier to achieve. There are 550,000 buildings and counting with positive BREEAM certification across the world, as net-zero becomes more and more important. To see this growing in the UK is definitely a good thing. At Multifix, we are putting further emphasis on sustainability to do our bit for the net-zero goals. You can find out about our recent sustainability pledge with Ecoligi here.
Article
The benefits of using B3 foam instead of traditional methods
Recently, more and more construction workers are looking to use B3 foam for their tasks, especially when it comes to insulation and sealing. But just what are the key benefits of using B3 foam? And how can using it not only make your life easier, but also help you get the job done well? In this article, we will look at some of the key reasons to use B3 foam and look into just how much it can help you. Firstly, what is B3 foam? B3 foam is a polyurethane foam that self-expands and is used to fill gaps in the construction process. Alternatives to B3 foam include expanding foam tape, non-expanding foam and other fire-rated foams, amongst others. A gamechanger for insulation The biggest selling point for B3 foam is its insulation capabilities, which have the potential to be revolutionary when used correctly. When applied properly and with care, B3 foam can make a huge difference in regards to boosting energy efficiency and keeping the heat in. The B3 foam itself expands when used to completely fill gaps, adding an insulation layer in the process and preventing the possibility of things like air leaks. In fact, B3 foam will form an airtight seal when it is applied, so the chance of an air leak or any thermal bridging is pretty much wiped out. This all makes a huge difference, making it easy to see why B3 foam is becoming more and more popular. Expanding power and fending off moisture As touched upon, another big pro to using B3 foam is the manner in which it expands after it’s used, which allows it to fill in pretty much any gap completely. B3 foam can expand to two to three times its original volume after being applied, which enables it to completely cover the area it has been applied to, even if it is being applied in a peculiar area with obstructions. In addition, B3 foam is very moisture resistant and this makes it a great choice for use in a basement or a loft, or any other humid or damp environment. As it can help condensation buildup and moisture breaking through, this subsequently reduces the risk of any structural damage, as well as mould. Easy to use and durable Finally, using B3 is very easy. By using a foam gun, you can get to areas that would otherwise be difficult to access, while it is also compatible with a variety of core surfaces. This includes the likes of wood, metal, concrete and masonry, which makes it a very versatile and adept product. It is also incredibly durable and long-lasting, which is naturally very important. The lifespan of B3 foam is akin to the lifespan of the building it’s been applied to, which makes it incredibly low maintenance once it’s been applied. Once it’s done, it’s done – you’re highly unlikely to have to go back to it or find a replacement in the immediate short term. A more efficient way There is a reason why B3 foam is becoming more and more popular and it’s something that we’re very much aware of at Multifix. We are always working on our range and are making sure that we have suitable levels of stock at our warehouse for your use. To see what types of B3 foam that Multifix offers, click this link.
Article
Hammer fix, nylon plug and frame fixing – what are the differences?
When it comes to securing objects to surfaces, there are three main types of fasteners to use – hammer fix, nylon plug and frame fixing. All three are capable of getting the job done to a high standard and all three fasteners are used for projects up and down the country every day. But what are the differences between the three? In this article, we will look at all three types and explain what they do and how they differ. Hammer fix The hammer fix fastener is normally used to secure lightweight fixtures, so things like electrical boxes and cable trays, to concrete or masonry walls via a pre-drilled hole. It is a metal anchor sleeve with a pre-installed nail or screw attached to it, with the sleeve expanding as soon as it’s been hit with a hammer, to make a solid hold. Able to be used with stone, concrete and brick, hammer fix fasteners are easy to use and you don’t need any fancy tools to install them – just a hammer will suffice. In addition, they are a reliable and assured fastener and will never let you down, should you choose to go down that route. Nylon plug Nylon plug fasteners are also a good fit for lightweight fixtures, but are capable of securing heavier items too, like shelving brackets, curtain rails or picture frames to walls or ceilings. They are essentially plastic anchors that have a pre-drilled hole in them, but they can be used in concrete, brick, plasterboard and drywall. Much like the hammer fix fastener, it needs a pre-drilled hole and can be fitted with a hammer, before being tightened with a screw. This allows the nylon plug to expand and grip onto the material. While there is a little more to do than when using a hammer fix, they are still very easy to install and their versatility is useful. Frame fixing Last but by no means least, frame fixing fasteners are the go-to when it comes to needing to fit something heavy to masonry, concrete, brick or stone, such as machinery, signage, handrails or structural elements. A frame fixing will be made up of a threaded metal sleeve with a screw and is installed after drilling a hole through what is being fastened and the material. The sleeve is then placed inside the hole and the screw is tightened, securing the object to the material. Something for everything All three of these fasteners are incredibly useful, but they all come into their own depending on how heavy the object being fixed is. For something light, the hammer fix is the right fit, for things slightly heavier, it’s the nylon plug that’s the best bet and for more heavy-duty fittings, frame fixing fasteners are the answer. To speak to an expert to find out further how these three can help you, or to find out what we stock, click this link.
Article
Drywall stud and track vs timber stud and track – what’s better for you?
For framing walls or ceilings, it’s normally a choice of using a drywall stud and track system, or a timber stud and track system. Both of these options are very good, but both have slightly different purposes and strengths, which makes it a case of using one or the other. In this article, we will delve into what they are and what they do so well, while also examining where they are best used. Drywall stud and track A drywall stud and track system is a lightweight metal system, which is very easy to handle and used for non-load-bearing interior walls, in addition to ceilings. The purpose of a drywall stud and track is to provide a strong framework for attaching any drywall panels, but it is also moisture resistant, which makes the system great for use in a bathroom or an area where mould may be an issue. Drywall stud and track systems are very easy to install and allow straight framing, as well as making sure the wall or ceiling surfaces are smooth and level. Timber stud and track As the name suggests, the timber stud and track is made up of wood instead of metal, which makes it heavier to handle, but like the drywall version, it is still straightforward to install. They tend to come in just one size, but they can be cut down on-site if needed. Unlike the drywall version though, the timber system can be used for both load-bearing and non-load-bearing interior walls. Whether it’s being attached to drywall, plasterboard or panelling, the timber stud and track system will deliver and being timber, are more environmentally friendly than the drywall version. The timber version also boosts thermal insulation, so that combined with being renewable makes them a very popular choice. Good options all round Ultimately, the choice comes down to what project you are working on. If you’re working on a residential project, where environmental benefits are very much factored in, then the timber stud and track system will likely be preferred. However, if you are fitting out a basement or an area where moisture or mould can be problematic, then the drywall version will be the best option available. Both are good choices and when utilised to their full capabilities, both will stand the test of time and deliver. For further information about either drywall or timber stud and track systems, we’ll be happy to talk to you and explain what stock we have. You can get in touch with us here.
Article
The second staircase guidance and how it impacts you
While the country was enjoying a bank holiday for Good Friday, the government published technical guidance on the second staircase rule at long last. This had been months in the making and now housebuilders have a definitive answer, it is set to make their lives a lot easier. But what exactly is the guidance and why is it so important? In this article, we will explain what the guidance is and how it can affect you moving forwards. What is the guidance? Back in December 2022, the government revealed that all new residential buildings over 30 metres would need two staircases, however, this was protested by a number of industry bodies. The reasons for the protestations revolved around safety. As such, the government sat down with them and agreed that the height should be lowered. In July 2023, the government knocked 12 metres off the height, so now any residential building with a height of over 18 metres will need two staircases. With that agreed, the government stated in October 2023 that there would be a 30-month transition period from the approved document's release date. On March 28, the approved document was released, meaning that the guidance will kick in at the start of October 2026. From this date, it will be compulsory for new buildings over 18 metres being built to have two staircases. How will the transition period impact me? During this time, any new applications for buildings over 18 metres can either follow the old guidance, or choose to follow the new one. The existing guidance states that a building of over 18 metres can just have a single staircase, but there is a reason why the second staircase guidance is being brought into effect. Ultimately though, the choice is to get ahead of the curve before October 2026 or to just have a single staircase like normal. Does a second staircase guarantee safety? This is where there is some conjecture, as while on the face of it the answer is yes, the deeper answer is a bit more nuanced. While the guidance insists on two staircases for buildings over 18 metres, it doesn’t say anything about having evacuation lifts or a second fire-fighting shaft as compulsory. It does state that in the event of an evacuation lift being fit, then they should be provided in an evacuation shaft, which will come with an evacuation lift lobby and a protected stair, but that’s it. This has angered some bodies, who believe that while this is just a minimum requirement, the guidance doesn’t go far enough in keeping people safe. Clearing up the news New regulations can throw people off kilter as it can change how they work, but as a result of reading this, you will hopefully be aware of the impact of the guidance. If you would like to get in contact with us to discuss it further, you can find out how to contact us by clicking this link.
Article
The construction industry is struggling, but are things getting better?
It’s no secret that things in the construction industry at this moment in time are not in the best of health. There’s hardship everywhere you look and unfortunately, it’s a very difficult time for many. At some point, there will be a light at the end of the proverbial tunnel, but the question on the lips of many is when is that light going to start to become brighter? In this article, we will look at the current state of the construction industry and analyse where potential shoots of positivity could come from in the remainder of the year. What’s actually happening at present? The picture is a somewhat bleak one, with construction companies folding at the highest rate in a decade, according to the Financial Times. According to the government’s Insolvency Service, 4,280 companies in construction went under between June 2022 and 2023, which was 16.5% more than the previous year. The picture didn’t improve for the rest of 2023, with it being reported by insolvency practitioner Begbies Traynor in January 2024 that 7,849 firms were at risk of collapse. That report from Begbies Traynor also highlighted that construction was the number one industry under significant financial distress. Is there any positivity on the horizon? The good news is yes, although it may still be a harsh ride until the end of the year. Currie & Brown have recently published their April 2004 UK construction market outlook and there are positive signs ahead. They are forecasting that there should be an increase in construction activity, although there is a risk this “could strain the current limited labour and contracting resources.” As such, they are hoping for a more staggered approach instead of “a synchronised rush where everyone pursues projects simultaneously.” In addition, they believe that despite the slowdown, there is ample long-term demand and they feel that companies who can position themselves strategically will be best placed to deal with the spike. The upturn isn’t just predicted by Currie & Brown, either. S&P Global believes that a painful six month period of decline is now over, as March 2024 saw the strongest increase in new orders since May 2023. This is especially encouraging as it has shown that a period of growth is coming to the construction industry, which is really important. The Glenigan Index isn’t quite as optimistic in the short-term, but does believe non-residential construction is showing signs of life, which is good. Reasons to be hopeful The Currie & Brown report is certainly a ray of sunshine amidst an otherwise cloudy backdrop and a much-needed one at that. Naturally, there is still a long way to go, as per the Glenigan Index, but the S&P Global insight was especially positive. As outlined in this article, we understand that things are very tough for everyone at present – whether you’re a small firm or a nationwide giant. If you have any concerns that we may be able to help with, feel free to get in touch with us. You can do so here.
Video
Grab Strength Test
In this video, Daniel takes a few branded adhesives and compares their grab strength test with the Multifix Stuck-it Extreme
Article
How a speedy supplier can improve your supply chain
The famous saying “slow and steady wins the race” certainly is true in some aspects and when it comes to a project, you can’t rush quality. However, it doesn’t always apply. This is especially the case when you need service from your supplier quickly – be it getting a quote, making an order or receiving a delivery. In this article, we will explain just why speed from your supplier matters and how it can make your life a whole lot easier. More time to prioritise the things that matter With a speedy supplier, everything falls into place much easier. You aren’t spending your day waiting around for a quote, you aren’t falling behind schedule because your deliveries are late and you can order what you need within seconds. This allows you time to solve other issues and to focus on the things that really matter on your projects, whatever they may be. Irrespective of what project you’re working on, being efficient helps significantly and if you can find a way to ensure that with your supplier, it all helps. Speaking of help, what can Multifix do when it comes to speed? Speed is one of the things prioritise so much at Multifix – and especially prioritising it while not compromising on our reliability or quality of service as a result. For example, we’ve worked especially hard to be in a position where we can guarantee that you’ll have a quote back within half an hour. In addition, should you be on our customer portal, it’s possible to make an order within 30 seconds. Everything on the portal is aimed at your convenience and that includes speed. As for deliveries, 75% of our deliveries are on-site before 12pm midday. In some cases, we’ve been able to have goods ready before site work even starts. When it comes to making your life easier, these are things we’ve found really help. Rapid resolutions We know how much speed can make an impact on your lives and your work projects, so that is one that will always remain one of our core customer values. One aspect of our speedy service is our delivery though, which we are delighted to say has a 99.3% success rate. To find out exactly where we deliver to, click here.
Video
Meet the Passive Fire Protection team!
When you need an order placed, have a query or just getting started on your journey with Multifix, this video will help you understand the role in the PFP team and who you need to speak to! Contact Simon! M: 07990 080237 | E: [email protected] Contact Anne! P: 0203 248 4086 | E: [email protected]
Video
Customer Portal overview - top features that will help your business
In this video, you will get an idea of what the top features are on the Multifix Customer Portal, in view of you understanding what you can do to get the maximum out of your portal account. Guides are here: https://multifixuk.com/expert_hub/portal-onboarding If you are unsure as to what user you are, see here: https://youtu.be/a8aaywvVmfs
Article
Comparing two of the best PFP solutions for loft compartmentalisation issues
Picking passive fire protection products when fitting a loft is a big decision. The need for it is enormous, given that without it, the loft is left open above the party walls. This means that a fire could tear through the loft, so compartmentalisation is necessary. However, picking the right solution can be difficult. In the main though, there are two main PFP solutions for loft compartmentalisation issues. They are the Protecta 80mm FR board (or 80mm batt) loft space system and either the Rockwool or Firefly fire curtains and in this article, we will compare both. We will be honest and admit that we do stock the 80mm FR board, but we will still provide a balanced and objective comparison between all three products. By the end of the article, you’ll know the differences between the batt and the fire curtains and which one will be better for your project. What are the main differences between the batt and the fire curtains? The key difference to note is that both the Firefly and Rockwool fire curtains are two layers, whereas the 80mm bat is just one layer. However, both still have the EI60 fire-resistance classification rating, which means they can hold off fire for a minimum 60 minutes. The feel of both is very different, too. The fire curtain is an insulation-like material, while the 80mm bat is more of a board. Other than that, there’s not a great deal of difference between the products, although both have different pros and cons, which we’ll come on to. There’s also not a lot of difference cost-wise, so your choice will be based on what system is best for the situation at hand. Pros of the 80mm batt One of the biggest pros of the 80mm batt is the speed of installation. It is estimated that the time to install an 80mm batt is 25% faster than other types of products, which can help you save on labour costs. This is because there is only one layer to install as opposed to two, but you still get the EI60 fire rating with the one layer. It’s also more pleasant to work with, in the sense it isn’t itchy and is quite easy to get into a loft space. Also, loft compartmentalisation is a tested detail on the bat, which is something of an industry exclusive. For those unaware, a tested detail means that the product has specifically undergone testing for that scenario. An assessment detail is something that has been given afterwards but isn’t specifically for the task at hand. Pros of the fire curtains Both Firefly and Rockwool are big industry names, so you’re getting a trusted brand. The Firefly fire curtain is seen as the industry standard, while Rockwool’s name is synonymous with quality. The fire curtains are also very lightweight and both also have the EI60 fire rating, which matches the 80mm batt. They can also be integrated with fire alarms, which means they are only activated whenever a fire is detected. A barrier will then be made between the fire and the free space. Another pro of the fire curtains is that they are very adaptable, in that they can be cut-to-fit on-site to certain size requirements. This can be particularly useful if they need to be installed on a property with an unusual design. Cons of the 80mm batt While it’s worth noting that both the batt and the curtains have very few flaws, there are a few prominent ones for each that could sway your decision. The main one for the 80mm batt is that it hasn’t been tested with doors in it, which could be an issue if there’s a fire door present. In this situation, the batt can still be fitted, but the installer would need to fire-certify the door first. If time is of the essence, then this could be problematic. Cons of the fire curtains As for the fire curtains, the main cons come for those who are handling them. Like all insulation material, they are rather itchy if they encounter your skin and they are also difficult to physically carry. While the curtains themselves are rather lightweight, the massive rolls they come with are not. Bringing these into a loft space can be challenging for those lifting them. Finally, as the fire curtain is two layers, it takes longer to install compared to the batt. Both have the same EI60 rating, but one is much faster to install than the other. Choosing between the batt and the fire curtains Both are very good products in their own right and most importantly, both will get the job done of protecting those living with it installed. If you are installing in a loft that has a rather unique design or has a fire door, then the fire curtains will be the best choice. Your workers may have issues lugging the curtain into the loft space and getting itchy skin, but the result is hugely impressive. However, if you’re in a normal setting, where there are no unusual characteristics to the building framework, then you can go down a different route. That different route can save some time, while also ensuring the same level of fire safety is intact. As such, in those circumstances, the 80mm batt is a great option. It could also save you in labour costs, as you could install more at a faster rate, helping you speed up a project without compromising on safety. The Protecta 80mm batt is still a relatively new product on the market, so if you would like to speak to our expert team for more information, you can do so here.
Article
I don’t have time – what do I need to know about Multifix?
We get it, you might not have time to hear us out properly. So here’s a super quick run-through of what we can offer you: - Fast and reliable delivery service – 99.3% success rate, 75% arrive before midday, next-day delivery as standard and your order can be live-tracked - Quality products, whatever you need – whether you’re in carpentry, brickwork or firestopping, we supply products from some of the best brands on the market - Expert staff – our team members have many years of experience behind them, so you’ll always be speaking to someone knowledgeable - A personal touch – we remember your name, you get a call before delivery and we strive to give you a quote in 30 minutes - Customer portal – power to order in seconds, have proof of deliveries and invoices in one place, set up requisitions and impose spending limits If you wish to find out more about any of these, give us a quick call and we’ll answer your queries. You can find out how to contact us here. Sounds interesting? To see what else we can offer you, watch this video to find out more.
Video
Meet the brickwork team!
When you need an order placed, have a query or just getting started on your journey with Multifix, this video will help you understand the role in the brickwork team and who you need to speak to! Contact Darryl | E: [email protected] | M: 07848 459595 Contact Christian | E: [email protected] | M: 07841 513 687 To get your quote/place an order call sales: 0203 248 4086 or email: [email protected]
Article
How can Multifix prove that they can give expert advice?
One thing that you’ll often see companies claim is that their staff members are experts in their field and that they’re extremely knowledgeable. However, that isn’t always the case and it can be annoying for you to ring up a supplier, place an order and not get what you want, due to a lack of knowledge or experience. At Multifix, we’re incredibly proud of the expertise within our team and we frequently make mention of it. But how can we prove that to you, especially if you’re someone who hasn’t used us before? In this article, we will explore why we say what we do and how we can back up the claims that we make. Staff with years of experience When people join Multifix, they tend to stay. As an example, all of our account managers and customer service specialists have been with the company for several years – some of whom have been with us for over a decade. Naturally, this is huge testament to the great work they do and the environment they’ve helped to create, but along the way, they’ve gained more and more experience and knowledge within their roles. As such, when you speak to them, you can be assured that you’re speaking to an expert and that they’ll be able to handle your query with confidence. Regular training It’s no secret that things change in construction – whether it’s new regulations, new products or new technologies and it’s important to us that we keep our eye on the ball. That’s why we frequently have training sessions for our staff, so that they are well versed with new developments, as and when they arise. We’re more than happy to welcome in external experts to pass on their knowledge to our team, so that they are better equipped to take your query. We see things first-hand Another thing we do at Multifix is that we frequently go out on the road to see our customers and to see how they’re doing with their projects. This is great for a number of reasons – not only can we see how things are going and whether our customers are satisfied with our service, but we can gain a better understanding of what you need from us when we’re out in the field. These experiences help us immeasurably and speaking to you to find out what your key issues are and how they can be prevented has also allowed us to become more knowledgeable to handle your questions. Sticking to our word As with every form of life, your word should be your bond and that’s very much the case with us. When we say that we have a team of experts ready to take your query, we really mean it. Our entire operation is built around doing what is best for you and that includes having extremely knowledgeable staff members to assist you wherever they can. To find out more about how we can help you, please feel free to get in touch with us. You can do so by following this link.