Expert Hub

All your questions answered

Article
Your Paslode questions answered

Paslode is arguably the biggest and most well-known brand when it comes to carpentry, which means people always want to know more.  After all, if you’re committing to buying a Paslode power tool, you’ll want to know everything before doing so. The last thing you want is buyer’s remorse, where you’ve got a product you don’t need. That’s something we want to avoid, as we would much rather that you make well-informed and knowledgeable buying decisions. Perhaps unsurprisingly, we get several Paslode questions every day. People always want to know more about their products and with good reason.  However, while our expert sales and customer service teams are happy to field your questions, there is a more practical route. By working with those teams, we have put together a list of our 20 most frequently answered Paslode questions and have provided answers for you, too.  This way, when it comes to making a decision on Paslode products, you have everything you need right in front of you.  Do you offer Paslode training? Yes! We have Paslode specialists at Multifix who can offer training, which is normally done on-site but can also be done online. You can find out more about the online course here.  The training covers familiarisation of the tools, how to use them properly, health and safety and environmental issues. At the end of the course, you’ll receive a certificate. Is there a surcharge with your Paslode products? No – the price that you see on the portal is the price that you’ll pay for the item. There are no hidden fees or surprises, although there may be a delivery cost depending on your order total.  Will Fischer nails fit a Paslode power gun? Yes and no. So, the Fischer nails will fit a Paslode IM350 as the IM350 can take other nails. But, Fischer nails will not fit the Paslode IM360, which only takes specific nails for that power tool. However… Will using other nails void my warranty? Yes – if you’re using a Paslode nail gun and it jams/breaks because you’ve used other nails, your warranty will be invalid. It’s the same with other gas cells for the IM350+. These will largely work fine and are compatible, but if they cause the gun to break, your warranty will be void.  Will using other nails invalidate my Paslode training? Also yes. The Health & Safety training part of the course specifically states you have to use Paslode nails for a Paslode product.  What is the difference between the IM350+ and the IM360XI? In short, the IM350+ is lighter, more compact, less noisy and vibrates less. However, the IM360XI is more powerful, can last a lot longer and is much more technologically advanced. The nails for the IM360XI are specifically made, but they’re cheaper than the IM350+ nails.  We have covered this in more depth in an article, which you can read here. Which nails fit what Paslode gun? The clipped nails, or D head nails, are for the IM350. Full-sized nails, or moon head nails depending on what part of the country you’re from, are for the IM360.  How many nails can my Paslode gun fire in a day? There are two ways to answer this question; how many shots per gas cell and how many shots per battery charge. The IM350 can shoot 1100 shots per gas cell and 9000 shots per battery charge. Meanwhile, the IM360 can shoot 1250 shots per gas cell and 13000 shots per battery charge.  Why is my Paslode gun not firing in cold weather? That’ll be to do with the gas – basically, the gas doesn’t work as well in the cold. As such, don’t leave it in the back of a van! In the winter, it’s advisable to keep a Paslode gas cell in your pocket, or you can try and warm the gas up with your hands.  What’s the difference between first and second fix? First fix nail guns are for pretty much anything structural. This includes roofing, fencing, cladding, decking etc. You can also use them for panelling and stud work.  Second fix nail guns, on the other hand, are for skirting and architrave.   What Paslode gun nailer does what job? The IM350+ and IM360XI are first fix, while the IM65 straight and IM65 angled are second fix.  Is Paslode the only brand that does nail guns? No, there are plenty in the market. These include Fischer, DeWalt, Hikoki, Milwaukee, Makita, Bosch and Senco, amongst others. While we can assist with Paslode and Makita, we can’t with some of the other brands listed. You can find a list of our recommended power tool retailers here.  How can I prolong the lifespan of my nailer?  In order to ensure your nailer lasts for a long time, you need to clean it to maintain its functionality. We stock a cleaning/maintenance kit here and you can watch a how-to YouTube video here.  What are the key differences between a gas nailer and a mechanical one? A gas nailer will need fuel for it to work, whereas a mechanical nailer is entirely battery-powered. It can be cheaper to use a mechanical nailer, as it requires less maintenance. For example, a battery’s lifespan can last three years, whereas a fuel cell can last 1100 shots. However, gas nailers are lighter and a fuel cell tends to last longer than most batteries. What does the blue cap do on the IM360XI fuel cells? It doesn’t do anything special per se – it just denotes that the nails are for the IM360XI and not for the IM350+.   Is there a shelf life on the Paslode fuel cells? There is an expiry date on each fuel cell, but that doesn’t mean you can’t use it if it goes beyond that. You’ll lose performance with cells that go beyond that date, but they don’t just stop working.   What PPE do I need with my Paslode power tool? You’ll need protective gloves, steel toecaps, a helmet, a hi-vis, ear protectors and eye goggles to operate a Paslode power tool . You will only be using them on-site, so you’ll need the site PPE essentials to use it.  How loud is my gun? The IM350+ is 89 dB (A), the IM360XI is 96 dB (A).  How heavy is a Paslode compared to a Fischer? There isn’t a lot in it; the Paslode IM350+ weighs 3.3kg, while the IM360XI weighs 3.8kg. The Fischer FGW 90F fits somewhere in-between, weighing 3.5kg.  What’s the difference between a straight and an angled gun? Both are second fix nail guns, but the angled gun is more for tight spaces. It’s much easier to get around corners and doors with an angled one, although their nails are more expensive.  The straight nail gun is more for straightforward construction, but is also much bulkier than its angled counterpart.  That just about covers it! Those are the 20 most frequently asked questions we get about Paslode and you should now have all the answers you need before making the next step.  If we haven’t answered a question you have in mind, please get in touch with our expert team and we will get you the answer you need. 

Read more → 6 min read
Article
Comparing the Paslode IM350+ and IM360XI: which nail gun is right for you?

For many carpenters, the Paslode IM350+ is one of the most reliable nail guns on the market. You’ve likely used it for many jobs, it’s never let you down and it’s something you’d recommend. But, the introduction of the IM360XI somewhat complicates things. Is it better? Can it make your work more efficient or easier? Is it cheaper to maintain? As Multifix, we stock both products and the nails for them, these are questions we’re asked by carpenters who are always exploring how they can do their job better. The truth is, you might not actually need to change. With some unsure in which direction to go in, we’ve put together a comparison article that identifies the pros and cons of each product. After reading this article, you’ll be able to identify what each nail gun does and which one is best for your needs. The IM350+ and IM360XI – what’s the difference? For those of you who have read our Your Paslode questions answered article, you’ll know that the long and short of it is that the IM350+ is lighter. However, the IM360XI is more powerful and much more technologically advanced. They also both require different gas cells. Perhaps the main key difference is the type of nail, though. The IM350+ will only take clipped head nails, or D head nails. By contrast, the IM360XI will only take full roundhead nails. Aside from that though, they are very similar. The nail length range on both is 50-90mm and it’s the same 2.1 Ah Li-ion battery for both as well, which takes 90 minutes to recharge. Additionally, both will manage two to three fixings per second, which equates to around 1000 fixings per hour. Now, we’ll delve into the specifics to help you understand each product better. Weight and handling As mentioned above, the IM350+ is a lighter nail gun than the IM360XI. There isn’t much in it – half a kilogram, in fact (3.3kg vs 3.8kg) – but it’s lighter nonetheless. You may think half a kilogram doesn’t mean much, but it has a huge impact on the levels of vibration both emit. The vibration value in metres per second squared for the IM350+ is 2.6kg, whereas on the IM360XI it’s 3.9kg. That’s quite the difference in kickback. The IM350+ is also smaller than the IM360XI, which makes sense given the weight difference. The IM350+ is 370 x 305 x 110mm, while the IM360XI is 381 x 328 x 127mm. There’s also quite a difference in noise, too. The IM350+ is quieter than the IM360XI, with the sound level of the IM350+ being 89 dB (A), compared to 96 dB (A) for the IM360XI. Taking everything into account then, the IM350+ is easier to handle, lighter, quieter and doesn’t vibrate as much. Winner: IM350+ Power and performance While the IM360XI isn’t as light or compact as the IM350+, it certainly makes up for that in other areas.  With the IM360XI, you will get 1250 shots from each gas cell. By contrast, the IM350+ will give you 1100, so you get 150 extra shots with the IM360XI.  Most impressively though, you will get 13,000 shots per battery charge with the IM360XI. This is a huge upgrade on the IM350+, which will give you 9000 shots per battery charge.  The IM360XI is also significantly more powerful than the IM350+. In terms of impact force per shot, the IM360XI will give you 105 joules, while the IM350+ will give you 82. As far as power-to-weight goes then, the IM360 really does pack a huge punch.  There is a slight caveat, however. The magazine capacity for the IM360XI is 47 nails, whereas on the IM350+, it’s 55 nails.  Despite that though, the IM360XI is head and shoulders above the IM350+ when it comes to power and performance. Winner: IM360XI Technology, nails and cost  Nail gun technology Given the IM360XI is a much newer model, there’s no surprise that it comes with a few gadgets that the IM350+ doesn’t have. Aside from the obligatory on/off switch, both also come with a rafter and belt hook. Where they differ though, is that the IM360 has a battery and fuel gauge, in addition to a Start & Go sensor. The Start & Go sensor is essentially a power-saving tool, as it turns the battery off if there hasn’t been any movement for 60 seconds. This is great for conserving battery life. The battery and fuel gauge is very useful as it tells you exactly how much gas and juice is left in your cell and battery respectively. For something so simple, it’s odd that the IM350+ doesn’t have this function. Naturally, this leads to some unpleasant surprises as your IM350+ can suddenly stop working due to the battery or gas cell running out. This is at least prevented with the IM360, allowing you more control over the nail gun. The nails themselves Moving onto nails and as stated earlier, they are rather different. The IM350+ only takes clipped or D head screws, which allows the user to stack them closer together. The IM360XI meanwhile, only takes full-sized roundhead screws. It is crucial to note that you can’t swap them over – IM350+ nails will not work with the IM360XI and vice versa. On average, IM360XI nails are around £4-8 cheaper per pack than IM350+ nails. As an example, the nail/fuel pack straight shank 3.1 x 90mm for the IM360XI list price is £71.92 after VAT. The nail/fuel pack smooth shank 90 x 3.1mm nails for the IM350+ however, has a list price of £79.96 after VAT. Despite the nails being cheaper for the IM360 though, there’s a good chance the contractor-supplied nails for a job are for the IM350+. This is because the IM350+ is still hugely popular, so the natural assumption is that it is being used for the project. Cost of each nail gun  As for the cost of the nail gun itself, it’s a dead heat. Both list prices are exactly the same – £527.99 after VAT. You can purchase the IM350+ here or the IM360XI here.   Technology winner – IM360XI  Nail cost winner – IM360XI  Product cost winner – draw  The IM350+ - who is it right for? There is a reason why the IM350+ is so popular among carpenters and even with the IM360 being on the market, that won’t change. It’s very easy to use, the nails for it are more accessible, it’s light and mobile – there are a lot of pros for using it. It all depends on how you work. If you like something light, reliable and doesn’t kick back despite having some power behind it, this is perfect. It’s very compact, it isn’t as loud and it’ll let you get the job done quickly. The IM360XI – who is it right for? Equally, if you want something with more punch, then the IM360 is the best fit for you. It does everything that the IM350+ can do and does it better. There’s more capacity, more shots per charge and cell and more power. This comes at a cost of being heavier, louder and with more vibration, but it’s also more efficient thanks to its technology. It’s amazing how something so simple can be such a huge point of difference, but being able to see how much charge/gas you have left is very important. What to choose? Ultimately, this depends on preference. There’s no doubt the IM360XI is a better nail gun, but it’s also not as easy to handle as the IM350+. Also, the accessibility point is something to consider. It would be very annoying, to put it mildly, to turn up to a job with an IM360XI and find there are only IM350+ nails supplied. In truth, both are outstanding products. Paslode has essentially taken a great nail gun and found a way to make it better. It doesn’t mean the old one is suddenly bad, as both will be a huge asset for any project. You are now armed with the information to make an informed decision based on your preference, though. And knowing this information, you can make a decision that’s best for your purposes and needs. If you would like to speak to an advisor about our Paslode range, you can do so here. Equally, you can buy the IM350+ here or the IM360XI here. If you are after the nails themselves, you can find those here.

Read more → 7 min read
Article
The good, better and best JSP respiratory masks

If you’re reading this, you’ve likely concluded that single-use disposable masks aren’t for you anymore. They’re hot to use, you need to get your face fitted every time and they can’t be used for that long. They do a job, but they’re a bit of a faff.  As such, now you’re after something more long-term. If that’s the case, then you’re in the right place. Many of our customers often ask about JSP masks, but aren’t sure which one will suit them best. At Multifix, we’ve stocked JSP products for a while now. Our range is only growing, so we have put this article together for you, covering the key points of the JSP range.  Come the end of the article, you’ll be able to distinguish the capabilities of the JSP range and what respiratory mask is best for you.  Good – JSP Force 8 If you’re after an entry-level respiratory mask, the Force 8 is a good place to start. One reason for this is that it’s compatible with PressToCheck filters, which temporarily stops air passing through.  This lets the user know whether the mask is airtight or not, although please note that you will need to be clean-shaven to wear this mask.  The Force 8 also comes with a typhoon exhalation valve for reduced breathing resistance, moisture build-up and heat. The twin-filter half mask is available in three different sizes (small, medium and large) and can also be worn with a hard hat. There are also other filters available, depending on what you need for your carpentry requirements.  In addition, while the Force 8 is designed for eight-hour use, it is reusable so long as you clean it after every job. The Force 8 is easily detachable, so the mask body, exhalation valve and diaphragm can last you a long time with a regular wash and clean.  For those who won’t need a respiratory mask that often, the Force 8 is ideal. Reliable, light and protective, this will protect you against dust, paint fumes and fibreglass as and when you need it. Better yet, it’ll do so without hurting your bank account too much.  However, if your work requires you to wear a respiratory mask frequently, it may be best to look at ones with more functions and more longevity.  RSP - £32. You can get the Force 8 for £10.79 elsewhere, but that’s just for the mask. The full price of £32 meanwhile, comes with two filters.  Better – JSP Jetstream Constructor It’s worth noting that we don’t stock the Jetstream Constructor, although we can get it in by request. However, up until very recently, the Jetstream Constructor was something of a flagship product for JSP. The leap in advancement, capability and price from the Force 8 is huge, but you also get so much more for your money.  It incorporates powered air. In short, powered air respirators ensure that a high volume of clean air is being sent to the breathing area, offering a greater level of protection.  The first thing to observe is that the Jetstream Constructor is rather unique in that everything isn’t in the helmet. The rechargeable respirator is attached to a belt and connected to the helmet through a very flexible hose, saving head weight.   The filter is graded at EN 12941 TH2P, which is the second highest standard, while the hose delivers 180 litres per minute of air through the filter.  Meanwhile, the EVO5 safety helmet has an EN397 standard and the polycarbonate visor has been graded at EN166 1.B.  One thing that causes discomfort for some is the need for a face fit when trying on respiratory masks. However, with the Jetstream Constructor, you don’t need one.  Thanks to the design, those with facial hair and glasses can wear it with no problems, which is incredibly helpful.  From a work perspective, there’s a lot right with the Jetstream Constructor, but it’s not perfect. While the hose is designed to be convenient, some may find it gets in the way when moving about. It can also be an issue if the belt or hose catches on something. That said, the battery for the Jetstream Constructor lasts eight hours and the kit package comes with everything you need.  The filter, hose, charger, battery, belt, helmet, visor, flow meter and carry case all come with the kit, which has proved very popular.  RSP - £489.95. The all-in-one package certainly suits, as it would be much more expensive to buy them all individually.  Best – JSP Powercap Infinity We are now at the top end of the JSP scale in terms of performance and price, but the cream certainly rises to the top in JSP’s case. The new Powercap Infinity doubles up as a four-in-one safety solution for those wearing it, covering the head, eyes, respiratory and ears. However, the Sonis ear protectors that can attach to it don’t come with it.  Onto specifics, the Powercap Infinity provides a minimum of 160 litres of clear, purified air per minute. It is also graded at protection level TH3, which is the highest possible rating in the EN12941:1988 + A2:2008 standard. The head protection is rated at EN397, while the optical class 1 visor has an EN166.B rating. This not only improves safety, but will offer you impact protection of up to 270mph.  There are three types of Sonis ear protectors available to clip onto the Powercap Infinity. For those landscaping or in workshops, the Sonis 1 is ideal and provides protection up to 26db.  If you’re using construction machinery amidst industrial noise, the Sonis Compact offers protection up to 31db. Finally, the Sonis 3 is ideal for quarrying and gives protection up to 36db.  In regard to usage, the Powercap Infinity’s battery gives eight hours of use before needing to be recharged. The battery takes eight hours to charge, which is a while, but has a lifespan of 500 full uses.  Also, much like the Jetstream, face fit tests are a thing of the past with the Powercap Infinity. More importantly, those with facial hair and glasses can wear it with no issues and no visibility problems.  Perhaps the biggest draw to the Powercap Infinity though is the smart PPE incorporated within it. Twice a second, real-time diagnostics will be monitoring both yourself and the system and then give you feedback based on that.  Battery and filter condition is available on the heads-up display and you will also get audio warnings if either needs replacing. The technology will also check high respiratory demand and maintain positive pressure inside.  Finally – and rather uniquely as a safety design – the battery isn’t at the top of the helmet. JSP has identified that while helmets protect you from debris falling from heights, there is a caveat.  If something falls and hits you on the head, the helmet will absorb it, but the battery area will not. With nowhere else to go, it’ll be the battery that causes you more damage than the debris, as it has to push downwards. As such, you can choose whether the battery is at the front or the back of the helmet instead.  Of course, if something were to land on the battery, there’s a good chance it’ll be damaged beyond repair, but you’d at least escape serious harm. Also, a lot of high-profile projects have trusted the Powercap Infinity. Network Rail has sanctioned them for use on HS2, while Berkley Homes and Taylor Wimpey will be using them for their upcoming ventures. They are also being used at Hinkley Point.  RSP – £623.50. The top end of the budget scale, but also a complete package. Will last the test of time and still be a top product years down the line.  The JSP range is very much a quality-first brand and everything here will be a huge asset for your endeavours.  If you’re on a budget and need to use something sparingly, then the JSP Force 8 is ideal. If you’re looking for something that could last decades with care, the Jetstream Constructor is for you. If you want something for life or want the top-of-the-range spec, the Powercap Infinity is your best bet.  As mentioned earlier, we don’t stock the Jetstream Constructor, but we can get it in by request. We do stock the Force 8, which you can acquire here.  Equally, if you did want the Powercap Infinity, you can find out more about that – and discuss pricing options – here.

Read more → 7 min read
Article
Multifix’s PPE: Enhancing safety and protection

PPE is naturally a hugely vital part of the job. Whether it’s a hi-vis, a helmet or eye protection, in order to work in the construction sector, you’re going to need PPE. It can’t just be any PPE, either. PPE such as helmets, head protection and gloves all need to be at an EN standard; otherwise, you won’t be deemed safe when on a site.  One issue we keep hearing about is finding a reliable provider of PPE, to help you with your projects and tasks. This is where we come in.  By no means are we suggesting that we are PPE specialists, but we do have a lot of PPE in stock, ready for immediate dispatch, to help you get the job done.  Our PPE comes from a number of manufacturers and is professionally graded. We can also get it to you as soon as possible, thanks to our fleet of dedicated drivers.  To give you an idea of what we have in stock, here is a rundown of the PPE that we have available.  Unbranded helmets and hi-vis The primary form of PPE in the workplace is either a hi-vis or a helmet – and we have lots of both in supply. The only caveat to this is that it is all unbranded, but if that isn’t an issue, then we have everything and more that you’ll need.  Be it orange or yellow hi-vis waistcoats, waterproof bomber jackets with a hood or orange hi-vis trousers, we can have you fully kitted out.  As far as safety helmets go, we stock these in a number of different colours. Our helmets come in an assortment of colours with additional add-ons, if needed. Boots No matter if you’re a size four or a size 12, we’ll have a pair of steel-capped boots for you. Our range of boots comes in either black or honey leather, so there is some slight choice in colour.  It’s important to work in comfort, but also to work knowing your feet are safe in the event of anything happening.  Gloves and sleeves Whether it’s rigger gloves, builder’s gloves, or just disposable gloves, we have you covered.  We offer gloves either as a pair or in large boxes up to 100, depending on what it is you’re after and even have some speciality gloves in our collection as well.  Also, except for our disposable gloves or household gloves, every one of our gloves is rated at EN388. We try to have all our gloves in small, medium, large or extra-large.  In addition, we also offer an EN388-rated 350mm Kevlar sleeve with a thumbhole, to fully protect your arm when in the workplace.  Eye and ear protection It’s important to protect your senses when in the workplace, which is why we also have a number of options for your ears and eyes.  We stock EN 352-2 graded overhead ear defenders, as well as your generic earplugs. We have corded hi-vis earplugs or disposable ones that come in a box of 200. As for eyes, we stock a number of safety goggles and safety specs. Respirators and face masks Finally, our respirator and face mask options certainly go from one extreme to the other. Whether it’s a three-ply disposable face mask in a box of 50 or a JSP Powercap Infinity respirator, we’ll have something for your needs.  We also stock FFP2 valved masks, FFP3 masks and also a number of half-masks, including the JSP Force 8.  As uncomfortable as they can be, we also supply face fit tests, which can be essential depending on what mask or respirator you choose.  That is a full rundown of the type of PPE that we can offer you. If you are seeking a reliable supplier of PPE, we are more than happy to assist you in any way we can with your projects.  If you would like to find out more about the PPE offerings we have here, or our delivery service, please get in touch with us here. 

Read more → 3 min read
Article
Three top tips for buying power tools (and why you shouldn’t always use Multifix)

When you start a new job and discover you need power tools, it can be tricky to know where to start. Asking your mates is a good shout, but maybe their suggestions aren’t taking your fancy.  Depending on what line of work you’re in too, you maybe don’t want something too expensive. If you’re only going to use it a handful of times, you probably don’t want to risk breaking the bank.  There is also a lot of choice with a lot of competing brands for similar items and finding out where to start can be daunting.  You needn’t fear, though. At Multifix, we offer a range of power tools, both 110V corded and 18V cordless, that will cover all your basic needs. Our Paslode and Makita range covers just about every power tool going, be it circular saws or drywall screwdrivers, or even combi tools.  If you’re stuck, we’re happy to field calls to help you make the best purchase for your project.  Sometimes though, that isn’t enough. And it certainly isn’t enough for some of our customers, who frequently ask for DeWalt, Milwaukee, or Festool. This is very understandable; they’re all reliable and outstanding brands, but when we inform you that we don’t stock them, we are asked… Why does Multifix only supply power tools that they keep in stock? Why don’t they sell other brands? Why don’t they have more variety? Well, we thought it would be best to give you some answers. As online competition increases, it’s sometimes cheaper to buy certain power tools elsewhere than it is for us to buy them wholesale and sell to you. What we do have in stock, we can still give you the best deal for – especially with Paslode and Makita products.  In the main though, we would suggest you look elsewhere. It’s not only cheaper than going through all the hoops with us for a power tool we don’t stock, but you get much more variety, too. In fact, we tell our customers the same thing on the phone. However, the next question we get is ‘what should I look out for when buying power tools?’  So, with that in mind, we have come up with our top three tips on what to do when purchasing power tools elsewhere.  Tip one: Know exactly what tools you’re getting There’s nothing worse than getting on site, unpacking your new tools and realising you’ve not got what you need. It’s a simple tip, but it goes a long way. Site veterans may scoff at this tip and assume it’s only for DIY users, but you’d be surprised. We’ve had more than a few calls from professionals saying, “this isn’t what I wanted,” when they’ve not fully checked what they’re buying.  The product images can be very deceiving, so make sure you read the description before purchasing. Things like sanding belts or extra blades – or even batteries – aren’t always included. For example, the DeWalt cordless saw range at Screwfix doesn’t include a battery or a charger; you have to buy them separately.  Tip two: Register your tools Unfortunately, there's a small chance that the power tool you have ordered either stops working, is faulty from the get-go, or breaks while using it. At this point, you'll want to return it, but unless you've registered it, you'll find this difficult. We sometimes hear of these examples happening, which is bad enough as is, but made worse by hearing the power tool wasn't registered. If your power tool isn’t registered, you won’t be fully covered by warranty.  Do it before you even use it. We understand it can be an easy thing to forget, especially when in a hurry, but it’s vitally important you do so. Otherwise, you risk wasting your head-earned money. Also, registering your tools often results in a longer warranty period and in some cases, free servicing. It’s worth doing.  Tip three: Check the fine print The topic of warranty leads us to our final tip. Make sure you know exactly what the warranty is and what options that come with it.  For example, some companies – ourselves being one – will come and collect the broken power tool from your site, which saves you time and money. Others may not offer that and it could be up to you to send it back through tracked mail, at your own expense.  Knowledge is certainly power in these sorts of situations and it can only help if you know exactly what you are getting with your power tool.  Now you have our top three tips, here are five power tool specialists that we would recommend you shop with… Power Tool World The clue is very much in the name with Power Tool World, who live and breathe…well, power tools. There are several reasons why we would recommend them and they mostly focus on customer satisfaction.  Given they specialise in power tools, Power Tool World always have a big stock holding, so if you need anything, there is a very good chance they have it. Also, they offer PayPal Pay in Three as a payment option, offer free delivery on orders over £50 and you can order before 7pm for next-day delivery.  ITS If you’re based in London, ITS are especially useful as they have stores in Leyton, Walthamstow and Harlow. This means you can pick up from them direct if you need something immediately.  Plus, ITS will offer a price match if you see anything on their site that either Screwfix or Toolstation can offer cheaper. They can even one up Power Tool World with their next-day delivery service too, as you can order up until 8pm and still get your item within 24 hours.  ToolChimp If it’s Tacwise products that you need, then ToolChimp is your go-to. They stock hundreds of Tacwise products and accessories, ranging from air nailers to plastic staples.  ToolChimp also has 0% finance options on orders over £120 and will offer a free delivery service in the UK, provided your order is over £100.  Nuts & Bolts Equally, if it’s Festool products that you’re after, Nuts and Bolts – otherwise known as N&B – are an excellent option. They offer great availability and very fair prices for the German power tools. This is important given how tough it can be getting out of stock Festool products, as not everyone can wait seven working days for an order. However, it is best to order through N&B over the phone, as their portal can be difficult to navigate. It’s worth noting there is nothing wrong with the service and the delivery is normally spot on, but some may find their website to be clunky.  Westcountry Machinery4Wood Much like N&B, Westcountry Machinery4Wood specialise in Festool power tools. Really, this makes sense given joiners love Festool products because of their precision to the millimetre. Their pricing and service are very good, plus their website is easy to use and order from. As such, this makes them a very comfortable recommendation from our side of things. You might think it’s weird to see us pick five competitor companies to buy from, but it's in your best interests to use these tips for power tool shopping.  When it comes to Paslode and Makita power tools, we provide industry-leading service. Despite that, we can’t cater to the entire power tools market in the same way that these companies can. So, in short, if it’s DeWalt or Festool you’re after, use these companies; they’ll have everything you need and more and all come with our seal of approval. With these tips too, you’ll get a satisfactory transaction every time and won’t be let down like you are when you call us and we can’t help.  If it’s Paslode or Makita you’re needing though, let us help you – find out how to speak to an advisor here. 

Read more → 6 min read
Article
All about delivery

If you’re new to Multifix, you might have some questions about the delivery service we provide. If you can’t find your question answered, give us call on 020 3248 4086, and we’ll be happy to help. Do you offer next day delivery? Yes, at least 95% of all of orders are picked and packed the same day we receive them and are delivered the next working day as standard. See below for our order cut off times. On the odd occasion we’re out of stock of a particular item, we’ll contact you to let you know and when you can expect your delivery. What is the cut off time for next day delivery? For next day deliveries within our own-van delivery zone, our order cut off time is 5.00pm. If your site is outside of own van delivery zone, these times vary as we would need to arrange a courier for you: for orders over 50kg (deliveries by a pallet courier), the cut of time is 4.00pm and for orders less than 50kg, the cut off time is 4.30pm. Do you offer same day delivery? As all of our fleet have left the depot by 7.00am, we can arrange same day delivery using a third-party courier service. Depending on where you are in the country, charges will vary. If you have an urgent requirement, talk to us and we’ll find a solution for you. Do you deliver nationwide? The short answer is, yes we do. We have been delivering to London & the South East for 30 years, with our own vans delivering to 93% of our customers. In those areas we don’t go to so regularly, we use reputable courier services. We know that using a third party service can be stressful for both you and us, but we are proud to have a 90% success rate with our partner services. What areas do you deliver to? Our own-van delivery zone is expanding all the time; we now deliver to Swindon & Wilshire and have a 3-year expansion plan to extend our coverage even more. To check if you’re in our own-van delivery zone, take a look at this map. Can you offer AM deliveries? 75% of our customers’ orders are delivered before midday. If you have an AM delivery requirement, please speak to one of our team when you place your order. If you’re ordering via the customer portal, just add the information to to the delivery notes section. If you opt for delivery on a third party courier service to guarantee an AM delivery, carriage charges will apply. Do you offer booked in deliveries and/or time slots? We know that some sites have delivery restrictions to keep the traffic flowing around them. We work together with several of our customers to achieve timed deliveries that are mutually workable. Talk to us to see how we can help you. Do you charge carriage? From 1 March, 2024, we will be introducing a carrier charge for all orders under £100.  What is the minimum order value? Our Operations team plan the most efficient use of our fleet on a daily basis. To help minimise our impact on the environment, we encourage our customers to place orders with a minimum value of £100. We know that this is not always possible due to site circumstances or space, so we are flexible in our approach. When can I expect my delivery? Multifix drivers call you shortly before they are due to deliver and leave parcels in a safe place when asked to do so. Can I track my delivery? When your order has been dispatched on our fleet, you’ll receive a text notification. This contains a link to the customer portal, showing an estimated arrival time. Here you will also find live tracking of your order. The ETA is updated regularly, according to the traffic conditions. You’ll also receive a text when your delivery has arrived – useful if you’re not the one on site receiving it. If your order is being delivered by a third party courier service, you will receive communications direct from them. Can I collect? If you’d prefer to collect from us, you can do so from our Distribution depot in Barking (IG11 0EG). Just head to the Customer Collections area, which is signposted. From order placement, all we need is an hour to process, pick & pack your order. Where can I find PODs for my orders? If you are registered on the customer portal, all order history including PODs will be shown on your account dashboard. If you’re not registered on the portal, simply call the Customer Services team and they’ll be able to provide a POD for you. What happens if there’s problem with my order? In the event of a problem with your order, please speak to a member of our Customer Services team in the first instance and we’ll sort out the issue for you. Are your vans and drivers your own, or do you use couriers? Yes, we have our own branded vans & lorries and employ our own drivers. Having our own vehicle fleet, and employing our own drivers gives us the agility to respond to customer needs, focusing our team where they’re needed the most. Our drivers are friendly & courteous and know their routes well as we don’t switch their areas - this way they get to know regular customers and their preferences. How will my order be delivered? Our fleet consists of panel vans, curtain sided trucks and a van & trailer combination with crane offloading facility for bulky items. All vehicles are 3.5 tonnes, which enables fast site offloading. Are your vehicles sign-written? All of our vehicles are sign-written with black and yellow Multifix branding, to enable easy identification for safety & security purposes. Do your drivers have their own PPE? Our drivers all have 5 point PPE (hat, gloves, glasses, boots & hi-vis) for their protection and to meet your site requirements. Will your drivers help me offload? Our drivers will help you take your boxes to your container or site office – it’s all part of our personal service. For deliveries not on our own vehicle, third party couriers offer a kerbside delivery service. Do you have FORS accreditation? Yes, we are FORS silver accredited. This accreditation ensures driver training, vehicle safety and insurance cover are to standard and CO2 emissions are measured and improved upon.

Read more → 5 min read
Video
Firex 2023

In case you missed this years FIREX Exhibition, here’s a short video summary.

Read more → 1 min watch
Article
Multifix Online Portal - New Features

1. Condensed menus Making it quicker & easier to navigate 2. Improved user set up Simplified flow to setting up new users. 3. Three new levels of user Easily customisable to your teams with the addition of one overall Super Admin user to increase security. 4. Order Management All order stages are now displayed together with filter options to find what you need, fast. 5. User Settings Your user settings condensed into one page. 6. Quick orders Browse from the website (Browse shop), use the search bar or use your favourites list to add items to your quick order or requisition. 7. Swap between orders for different sites or projects Integration with the Website, create a quick order or requisition and then browser through our Shop to add to your order. This new feature also enables you to swap between drafts and also enables you to create new orders within the shop. 8. SMS / Email confirmation Ability to receive notifications as to when orders are despatched from our warehouse with an eta and then also when they are delivered. This can be by SMS or by email depending on what you prefer.

Read more → 1 min read
Article
What is an acceptable DPC for cavity trays in cavity wall construction? NHBC Technical Guidance 6.1/38

Using the right grade of DPC for cavity trays is important in order achieve the NHBC Buildmark warranty. On 11th November, the NHBC published technical guidance note to clarify what was already in the standards. Here’s a brief summary of the guidance note and help on selecting the right product: What DPC can’t I use as a cavity tray? Polyethylene DPC made to BS 6515: 1984 (categorised as low-density polyethylene). This IS suitable for use as a DPC to prevent moisture rising from the ground but NOT as a cavity tray. What DPC can I use as cavity tray? The product selected must meet ALL of the following criteria: Material: Flexible (plastic or rubber) DPC Designed: To prevent the downward passage of water or moisture through the tray Performance: Meets the requirements of BS EN 14909 Certification: Third-party certification that confirms their suitability for use as a cavity tray That sounds expensive! A high performance DPC can cost up to four times the price of a standard DPC. When comparing quotes, it’s useful to bear this in mind to ensure you’re receiving the right product for the application. When does this guidance come into force? Whilst this has been part of NHBC guidance for some time (Standards clause 6.1.17), on “all plots starting or at DPC level as at 1st January 2023, the use of appropriate flexible DPCs (as described above) will be required and use of low-density polyethylene DPC conforming only to BS 6515 will no longer be accepted.” What’s the right product to select from Multifix? We stock the Visqueen Zedex CPT high performance damp proof course as 20m length rolls in widths 100mm, 450mm & 600mm. We also carry a range of Brickwork sundries including pre-formed cavity trays for corners and ridges. If you already have a Multifix account, roll your mouse over any of the product sizes or references above to see your rates. How can I be sure this is the right product? The products meet the requirements of BS EN 14909 and Visqueen carry third party accreditation specifying its use as a cavity tray, as per the NHBC technical guidance. Download BBA 94/3059 and their DoP here. How do I open a Multifix account? Click here to open an account. Where can I find the full technical guidance note? Technical guidance notes can be found on the NHBC website. Here’s a link to note 6.1/38

Read more → 2 min read
Article
Construction Industry update Q4 2022

We’ve brought together the headlines from some leading Industry sources to provide a snapshot of the economic outlook for the Construction Industry. Construction Output expected to fall significantly in 2023 amid looming UK Economic Recession Headlines from the Construction Products Association (CPA) forecast a reduction in construction output of 3.9% in 2023 (compared to a rise of 2.0% in 2022). The CPA cite this as “mainly due to the impact of a wider economic recession, exacerbated by the effect of the ‘Mini Budget’, and the consequent fallout from recent political uncertainty.” For the full article visit ConstructionProducts.org.uk Construction Outlook: October 2022 Hewes & Associates forecast the decline of Construction Output in 2023 to be 5% and, state “Tighter public spending, higher inflation, and in turn raised base rates will be the new reality in our view. Efforts to control inflation will, we expect, result in base rates rising to around 4%, while inflation is forecast to peak in 2023, and drop to around 4-5% by 2024.” They also predict a housing downturn in 2023/2024 due to high borrowing rates, pressure on household incomes and low economic confidence, although “we do not foresee another round of austerity of the likes undertaken over the years 2010-2015” For the full article visit Hewes-Associates.com Some of the levers affecting these predictions: For the full article visit Building.co.uk Inflation: Energy costs:

Read more → 1 min read
Frequently Asked Questions - Fire Door Foam™

When it comes to fire safety, there are always questions as to what products are safe and certified to use and rightly so. When it comes to Fire Door Foam™ we have all the answers you need right here.  Q: What fire rating does Fire Door Foam offer? A: Fire Door Foam has been fire tested to 60 minutes (BS476 Pt20/22: 1987 & BS EN1634-1) in timber and composite doorsets and timber glazed screens. Q: What is the minimum and maximum gaps Fire Door Foam can be used? A: The minimum practical width is 5mm and maximum tested gap is 33mm. Q: Do you have to install Fire Door Foam with specialist packers of fixings? A: No, Fire Door Foam has been specifically tested with plastic packers and standard screw fixings. Timber and MDF packers may also be used when required. Q: Do I need to cap off Fire Door Foam with intumescent mastic? A: No, there is no need to cap with mastic for ratings of up to 60 minutes. Q: Can I add architraves over Fire Door Foam? A: Architraves are optional, Fire Door Foam has been tested with and without. Q: Does Fire Door Foam have a shelf life? A: Fire Door Foam has a 12-month shelf life whilst stored in temperature conditions (5°C > 30°C). Q: How many doors can I seal per can? A: A 750ml can will seal 3-4 single doors within a standard structural opening (10mm x 70mm void). Q: Does Fire Door Foam have an acoustic rating? A: Yes, Fire Door Foam has sound reduction capabilities of up to 60dB Rw. Q: Can I use Fire Door Foam when doorsets are required to have smoke control? A: Yes, Fire Door Foam has smoke leakage evidence to BS EN 1634-3: 2004. If you have any other questions about any of our products, speak to a member of our team today on 0203 248 4086 or email [email protected]

Read more → min read
Article
Paslode IM360Xi

The 360Xi framing nailer is light and perfectly balanced to guarantee a great performance for multiple applications. A high performing lithium battery and a weatherproof fuel cell ensures the tool will run all day, every day no matter the challenge.  Features:  Unbeatable power to weight ration. Lighter and better balanced tool: 3.6kg.  Quick release magazine  New battery position for high performing battery.  Re-engineered grip.  Benefits: Able to drive long nails into the hardest substrates.  Guarantees all day productivity.  Designed to make nail jams a thing of the past.  Ensures your tool will work all day. Every day. Ensures extra comfort and convenience.  

Read more → 1 min read
Article
How to efficiently clean your Paslode Nail Gun

When it comes to Paslode, you won't find a more reliable nail gun. Although it's build to withstand tough working conditions, it is important to regularly clean and maintain your Paslode nail gun to ensure it remains in tip-top condition. How often should you clean your nail gun?  You should clean your nail gun every 50,000 shots. On every Paslode tool, you'll find an indicator that will tell you when it is due to be cleaned. Of course, if you're working in a particularly dirty environment, or on an intense project, you may want to do this more regularly. 15-minute step by step:  1. Make sure your nail gun is safe to clean by removing the nails in the magazine, along with the battery and fuel cell by pressing the eject button on the side of the tool.  2. Remove the shoulder screws from the rear of the tool and remove the cylinder cap which will also contain the filter. Use the Paslode Spit cleaner and spray directly onto the filter.  3. Next, remove the black cable related to the spark unit and the white cable related to the fan. Twist the fan unit and gently remove it.  4. Pinch the O-ring and ease it away from the rest of the tool. Then, use the Paslode cleaning spray to clean the entire fan unit. Once sprayed, replace the used O-ring with a new one.  5. The combustion chamber is the next part that you'll need to clean. Before you use your Paslode cleaning spray, push the combustion chamber downwards to gain full access. Spray with the cleaner and use the lint-free cloth and wipe inside the chamber.  6. Apply Paslode lubricant to the inside of the combustion chamber, and round the outside where it rests against the O-ring.  7. The lubricant must be evenly spread throughout the chamber. Unscrew the quick release knob so that the magazine case can be removed, giving access to the piston. Move the piston back and forth to distribute the lubricate  8. Next, reassemble the nail fun, including the cylinder cap. Don't forget to reattach the black cable to the spark unit and the white cable to the fan before finally screwing back on the cap.  9. Put the magazine, battery and fuel cell back into the nail gun and test that it works. Cleaning: Do's & Don'ts Do - Remember to let the tool cool down before you clean it. Do - Wear protective eyewear and gloves. Do - Use a Paslode Lubricating Oil as it is formulated to withstand the high temperature generated by Paslode nail guns. Do - To avoid damaging the tool or injury, tighten all the screws when reassembling . Do - Test the tool once you've finished cleaning. (Don't be alarmed if a small amount of smoke comes from the nail gun - it's normal!) Don't - AVOID other lubricants which can cause a rapid build-up pf combustion residue, affecting the tool's performance and longevity. See our Paslode Cleaning Kit here.

Read more → 2 min read
Article
Are your masks fitted correctly?

The JSP Force 8 is a reusable half-mask, negative-pressure respirator. It consists of a filter-holding unit and is made from moulded rubber. The mask has intake and exhaust valves attached to adjustable straps, which fit tightly to the wearer's face.  The JSP Force 8 has a replaceable filter that removes dust when the facepiece seal is leak-tight and delivers high protection against water and oil-based dust, mists and fumes. Does your mask fit correctly?  If your mask isn't fitted correctly, it won't give you the protection you need. Luckily, the new Force 8 PressToCheck means that the fit of the JSP mask can be checked quickly and easily.  1. FIT IT! Put the straps and harness over your head and pull them to a suitably tight and comfortable fit for you.  2. PRESS IT! Use the PressToCheck function and squeeze the front and backs of both filter covers together to stop air from entering through the filters.  3. CHECK IT! When you inhale, no air should come through the mask. If it does, adjust the mask and straps and repeat the process until it doesn't. Release when seal is made. What makes the JSP Force 8 Half Mask so great? It provides protection against construction dust. Made from lightweight thermoplastic rubber, it is flexible, fits most face shapes and is comfortable to wear. The 4-point cradle suspension harness with quick-release buckles ensures a daily face fit reassurance. The CR2 reflective strips create increased visibility in low light environments for added safety. The face mask components break down easily, allowing for cleaning and maintenance, making it more hygienic. It passed the dolomite clogging test and conforms to EN143. Add the P3 Filter which: Fits easily to the Force 8 Respirator  Has an advanced Typhoon Exhalation Valve that provides low breathing resistance, low heat, moisture and CO2 build-up also performs well at low temperatures. Features a Force 8 PressToCheck function, which instantly indicates if you have an effective face seal. Take a look at the JSP Force 8 Mask Here and our PressToCheck P3 Filters here.

Read more → 2 min read
Article
Which panel adhesive should I be using?

Not sure what type of panel adhesive you should be using? Unsure as to the differences between them? Take a look below at panel adhesive explained. The 3 Main Types of Adhesives Acrylic Based- Acrylic Adhesives are manufactured using acrylic or methyl acrylic polymers & fillers. They dry by a loss of water into a substrate (one of which must be porous). They are extremely strong and efficient in bonding multiple objects together and are very environmentally resistant. Solvent Based- Solvent based adhesives are manufactured using rubbers & resins. They are a glue or adhesion product that usually comes in the form of a liquid. Resins are dissolved in a volatile solvent to produce a tacky polymer solution, which can be extremely adhesive when dry. These dry by the evaporation of solvent air. MS/Hybrid Polymer Based- MS/Hybrid Polymer based adhesives combine polyurethane & silicone technology to deliver hybrid sealant that is extremely versatile. These are a one-part, elastic adhesive based on a modified silane polymer that cures when exposed to moisture to form high-performance elastomer. Which Panel Adhesive should I order and why?

Read more → 1 min read
Article
Protect your workforce

Tackling inefficient removal of silica dust on construction sites is a priority for the UK Health and Safety Executive (HSE) and construction sites are legally required to use an M-class vacuum or extractor. That’s where the V-TUF M-Class Mini comes in! It is the safest and most efficient way to tackle dust on-site. 9% filtration efficiency Lightweight (Only 5kg) Washable filters Integrated filter shaker system Lightweight, compact, easy to store Extraction velocity monitor Using a V-TUF M-Class Mini protects those working on construction sites as it reduces the amount of harmful dust particles they breathe in through the air.  Regularly breathing construction dust can cause diseases like lung cancer, asthma, chronic obstructive pulmonary disease (COPD – which includes emphysema and other breathing difficulties) and silicosis.  Silica is the second biggest killer of construction workers after asbestos." (HSE) Using a V-TUF M-Class Mini protects those working on construction sites as it reduces the amount of harmful dust particles they breathe in through the air.  Unrated vacuums can exhaust over 80% of harmful dust particles back in the air, which remain airborne for up to 8 hours. The V-TUF M-Class Mini, paired with M-Class rated filter bags that have a 99.9% filtration efficiency, and has been designed to protect your workforce from serious long-term health problems and disease in the future. Save time and money Using a V-TUF M-Class Mini makes cleaning up and packing away much quicker, enabling you to swiftly move on to the next project. Efficient dust extraction can also prolong the performance of the tools and accessories used on-site. It ensures that tools aren't clogged up with dust and require less maintenance. If you choose to invest in a V-TUF M-Class Mini you’ll need to use M-Class dust filter bags. Extra strong with a hard cardboard collar and a soft rubber sealer ring, our M-Class Dust Filter Bags are approved for the use in the V-TUF M-Class Vacuum range.

Read more → 2 min read
1 2 3 4 5 6 7 9

If you haven't seen what you need, an expert will help
you find the solution you need.